Gentec-eo QUAD-4Track Manuel d'utilisateur télécharger pdf (Page 14)

QUAD-4Track User’s Manual Revision 2.1 14

WVQ, the wavelength response query, returns the sensor wavelength and percent

response at the desired index. The instrument stores 40 response points in the sensor

EEPROM. Sending the query with arguments from 0 to 39 will return each of the points

respectively.

The following commands access the EEPROM used in the sensor. They should be used

as queries only as they will overwrite the factory values if used as commands.

PRV, the probe responsivity query, returns the responsivity for the requested channel.

The argument is the channel index.

Argument Sent

Channel Responsivity Returned

Channel A

Channel B

Channel C

Channel D

PWV, the calibration wavelength query, returns the calibration wavelength in nm.

PSZ, the element diameter query, returns the element diameter in meters.

PTY, the sensor type query, returns the sensor type index. 0 is a Joulemeter, 1 is a

Radiometer.

The Main Display

The Main Display Panel has two display regions. They are:

1. The Position Data Display, which is on a user selectable tab.

2. The Sensor Data Display, which is on a user selectable tab.

3. The Calibration Display, which is on a user selectable tab.

The Position Data Display

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 30 31

Pas de commentaire

Gentec-eo QUAD-4Track Manuel d'utilisateur Page 14