Gentec-eo QUAD-4Track Manuel d'utilisateur télécharger pdf (Page 13)

QUAD-4Track User’s Manual Revision 2.1 13

MAX, the maximum range query, returns the maximum range index that can be

requested. If the range command is sent with a index greater than this value, and ERR is

returned.

MIN, the minimum range query, returns the minimum range index that can be requested.

If the range command is sent with a index less than this value, and ERR is returned.

MRD, the maximum reading query, returns the maximum value that the instrument can

measure.

TRG, the trigger level command, sets the internal trigger level in % of full scale. The

allowed range is 2% to 20%. Values outside of this range will be ignored and ERR will

be returned. If sent without an argument, the current level is returned.

TSC, the trigger source command, sets the trigger source to internal or external. An

argument of 0 sets the trigger to internal, and argument of 1 sets it to external. The source

cannot be queried.

POL, the external trigger polarity, set the external trigger edge sensitivity. An argument

of 0 sets the trigger to rising edge, and argument of 1 sets it to falling edge. The polarity

cannot be queried.

SRC, the analog out source command, selects which signal to send to the analog out

BNC. The source cannot be queried.

Argument Sent

Analog Out Source

4 Channel Bar Graph

Channel A Pulse

Channel B Pulse

Channel C Pulse

Channel D Pulse

WAV, the user wavelength command, sets the wavelength in use. The argument is the

wavelength in nm. No argument returns the current wavelength. This command is used in

conjunction with the WCM command.

WCM, the wavelength compensation command, turns wavelength compensation on or

off. An argument of 0 turns it off, and argument of 1 turns it on. No argument returns the

current state. This command is used in conjunction with the WAV command.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 30 31

Pas de commentaire

Gentec-eo QUAD-4Track Manuel d'utilisateur Page 13