Gentec-eo QUAD-4Track Manuel d'utilisateur télécharger pdf (Page 19)

QUAD-4Track User’s Manual Revision 2.1 19

The X position of the beam on the detector surface in millimeters. The units are only

visible when the Beam Position has been calibrated.

Y (mm)

The Y position of the beam on the detector surface in millimeters. The units are only

visible when the Beam Position has been calibrated.

Pulse Energy

The total energy in the beam. This is the sum of each of the energies measured by the

quadrants.

If any of the 4 channels is over ranged, this indicator's background will turn red.

Quad Energy A

The energy in the portion of the beam incident on quadrant A, the upper right quadrant.

If the channel is over ranged, this indicator's background will turn red.

Quad Energy B

The energy in the portion of the beam incident on quadrant B, the upper left quadrant.

If the channel is over ranged, this indicator's background will turn red.

Quad Energy C

The energy in the portion of the beam incident on quadrant C, the lower left quadrant.

If the channel is over ranged, this indicator's background will turn red.

Quad Energy D

The energy in the portion of the beam incident on quadrant C, the lower right quadrant.

If the channel is over ranged, this indicator's background will turn red.

Frequency (Hz)

The frequency (pulse repetition rate) of the pulses being measured.

Triggered

Illuminates when the instrument is triggered and sending data to the VI. If triggers stop,

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 30 31

Pas de commentaire

Gentec-eo QUAD-4Track Manuel d'utilisateur Page 19